FSX Light-Duty DPF Cleaning System
Automotive & Light-Duty DPF & DOC Cleaning System
#1 OEM-recommended DPF cleaning equipment in the world!
The FSX Light Duty DPF Cleaning System contains all the equipment needed to clean diesel particulate filters (DPFs) and diesel oxidation catalysts (DOCs). This system is recommended specifically for light-duty trucks, automobiles, and off-road vehicles with closed-end filters. The FSX Light Duty DPF Cleaning System can successfully clean up 32 filters per 8-hour shift.
Application:
Closed-end filters
Light-Duty & Automotive
Get a quote on the FSX Light-Duty DPF Cleaning System
FSX CatBlaster™ 2P
Pneumatic DPF Cleaner
The FSX CatBlaster 2P is a high-volume pneumatic cleaning machine that effectively uses bi-directional pulsing to clean closed-end DPFs and DOCs. FSX pneumatic cleaning machines have set the industry standard for cleaning these filters. The FSX CatBlaster 2P tests and detects damaged filters within the first two minutes of operation. Bypass detection is unique to FSX Equipment. This pneumatic cleaners remove up to 96% of soot and ash from DPF and DOC filters.
FSX CatBlaster™ 2H
Wet Cleaner
The FSX CatBlaster 2H is a single-direction wet cleaning machine that clears the remaining soot and ash from the DPF and DOC filters. It is the second stage of cleaning light-duty filters
FSX SootSucker™
Dust Collector
The FSX SootSucker captures soot and ash removed from the DPF and DOC and drops the waste into an easy to empty 5-gallon bucket. The two-stage filtration system used a primary and HEPA filter to remove hazardous particles from the air.
FSX TrapBurner™ 8
DPF Thermal Regenerator
The FSX TrapBurner™ 8 is a thermal cleaning machine used to burn away any remaining soot left after pneumatic cleaning and loosen any remaining ash. It is used as a secondary cleaning stage or Stage 2 cleaning. The FSX TrapBurner™ 8 can process up to 3 heavy-duty filters at a time and safely heats filters to OEM specifications, leaving the filter looking new.
Floor Layout
Electrical & Air Requirements
CatBlaster 2P | CatBlaster 2H | SootSucker | TrapTester | TrapBurner | |
Volts | 208V-240V, 480, 3 phase 60 Hz | * The FSX CatBlaster 2H is powered entirely by the FSX CatBlaster 2P | 208-480v 3 phase 60 Hz | 208-480v 1-3 phase, 60 Hz | 208-480v 3 phase 60 Hz |
Amps | 8.1-16.2 | 5-10 | 2.5-10 | 11.6-48 | |
Kw | 3.9 | 3.1-3.5 | 1.6-1.75 | 10 | |
KVA | 3.9 | 3.9-4.4 | 2.0-2.2 | 10 | |
Hp | 5 | 1.5 | n/a | ||
Pf | .94 | 0.84 | 0.84 | n/a | |
Air | 40 CFM @ 100 PSI (1,132 LPM @ 7 Bar) – 80 CFM @ 100 psi (2,265 LPM @ 7 Bar) |