FSX SootSucker 2
Support – Dust Collector
The FSX SootSucker™2 is a powerful dust collector designed to capture soot and ash particulate released during pneumatic cleaning in the FSX TrapBlaster™ and FSX CatBlaster 2P. As a fully contained dust collection system, the FSX SootSucker™2 is able to keep the air in the shop clear of hazardous particulate. Capturing particulate optimizes the performance of the FSX pneumatic cleaners.
Part of the FSX Complete DPF Cleaning System –
Connects to the FSX Cleaning Machines
Get a quote on the FSX SootSucker 2
Two-Stage Filtration
The two-stage filtration system keeps the shop clear of diesel soot and ash. The primary filter captures large particles released by the diesel filter and expels the remaining air onto the next stage of filtration. The second filter in the system is a high-efficiency particulate arrestor (HEPA) filter. FSX uses a HEPA filter as part of the FSX SootSucker™2‘s two-stage filtration system to increase the safety of the work environment.
Throughput
The FSX SootSucker™2 averages 300 filters cleaned before needing to be replaced and the HEPA lasts between 1,500 and 2,000 filters cleaned.
Reverse Pulse Sequence
The FSX SootSucker™2 has a long filter life because of the self-cleaning-reverse pulse feature. The primary filter gets pulsed periodically so the filter can capture more dust and extend the life of the primary filter.
Self-Contained
A 5-gallon bucket captures particulate dropped from the primary filter during each reverse pulse sequence making for easy disposal. The bucket has an air-tight seal to keep particulate from releasing into the shop. A step-down bar lowers the bucket so the operator can check for disposal needs. Red and green guages alert the operator when the filter needs to be changed.
*Check with local waste management for disposal guides.
FSX SootSucker™2 Specifications |
|
Air Supply: | Automatically uses air from TrapBlaster Air Supply – 4 CFM @ 100 PSI (113 L/min at 7 bar) |
Air Dryer: | Required (not included) |
Air Connection: | 1” NPT female connection (jumper hose to TrapBlaster included |
Pipe Diameter: | 1 ½” ID delivery line |
Suction, Pressure, & Flow: |
Max: 1400 CFM at 4“ w.g. (40,000 L/min at 10 mbar) Min: 750 CFM at 6” w.g. (21,250 L/min at 15 mbar) |
Dimensions: | 105″H x 26″W x 26D” |
Weight: | 685 lbs |
Electrical: | 2 HP motor; 208/230/480 Volt, 3-ph |
Inlet Port: | 8″ QF duct connection on side; HEPA exhaust on top |
Shipping Weight: | 840 lbs |